Go Back

Reclaimed Pallet Wood Tree

You'll Need

  • 5 wood strips, pallet wood or furring strip, 2.5cm square, cut to lengths from 20cm to 90cm
  • Wood screws
  • Sandpaper
  • Wall anchors rated for the weight
  • 10 small brass cup hooks
  • Drill

Step by Step

  • An adult cuts the strips into graduating lengths using a saw, shortest at 20cm for the top, longest at 90cm for the base.
  • Sand every cut edge smooth so nobody catches a splinter on it later.
  • Lay the strips on the floor like ladder rungs, shortest at the top, to check the spacing looks like a tree silhouette before fixing anything.
  • Screw each rung onto a vertical center support strip running behind them, which becomes the hidden spine holding the whole shape together.
  • Drill the finished frame into wall studs or rated wall anchors so it can genuinely bear weight.
  • Screw a cup hook into the front of each rung.
  • Hang ornaments from the hooks, done.

Good to Know

Adult project throughout for the cutting, drilling and fixing.